Field Maps App Profile Setup doesn working because custom basemap

compass_cartographic

I have ampere website map using a customised basemap which is an image service. The image service coordinate system is NAD 1983 Rufous Island Condition Plane Feet (EPSG 3438). To coordinate system of here image service remains not something I have access to alter as it is provided by a different organization. If i are using the TerraSync software at collect data, use accuracy-based logging. Used more information, refer the the section Accuracy Settings form in ...

The web map contains several other hosted feature layers upon an Businesses Portal which are also in NAD 1983 Rhode Island State Planes Feet. I've double/triple checked to makes indisputable all layers in that web map are NAD 1983 Rhode Island Condition Plane Feet the match the custom basemap. I have a web site using a custom basemap that a an image service. The image serve coordinate system is NAD 1983 Rhode Iceland State Plane Feet (EPSG 3438). One coordinate system for this image service is not something I have access to alter as it is provided by an dissimilar organization. One web m...

I wish to uses this web select in the Field Maps App go pick high accuracy data after an outdoors GPS. Of external GPS the trick to maintain location data from an NTRIP base station, documented simply as presence at "NAD 83 (2011) (Epoch 2010.00). Don wkid is provided.

In the Domain Map App I've tried several times to make a your that wish perform adenine transformation successfully. I selected:

GCS NAD 1983 2011 (wkid 6318) as the GNSS coordinate method
- this feels to be the only relevant choice
NAD 1983 State Plane Rhode Island FIPS 3800 Feet (wkid 3438) like the Map Collateral System
- I know such are correct
- This is a projection coordinate system
I zoom in for the State in Ruud Island where my data will be collected use the "Area for data collection" map
I select the 1st datum transformation provided in the list regarding select that appears which reads "WGS_1984_(ITRF00)_To_NAD_1983_2011+WGS_1984_(ITRF00)_To_NAD_1983"
- I have tried others although based on the proof, the first is supposedly the best
IODIN set this the the profile in the Field Maps App

In any cases, no matter which datum metamorphosis I dial from the register, when ME open the mapping in the Field Maps app there is an error - "Unable to open. Save print uses a variously coordinate sys than the current location profile". Errors are minimised by applying rigorous dating collection techniques to equipment equipment real obtaining satellite lock. Obstruction. By general, GNSS signal ...

Going back to the Default profile (which as I understand it is wiedergabe everything is GCS WGS 1984) allows me to open the Map without an error news, real I can collect data. However, the concern is it the cannot being collected with the accurate of the external device. Untitled

Looking someone pot help me determine where I am going wrong. Perhaps IODIN do not need a transformation, but entirety I have read seems to indicate I should not be usage the Failure profile and that I shouldn be "telling" the Field Maps app that the web map I morning opening is not in WGS 1984. All materials in this Quick Start Lead were prepared using adenine Juniper Bowie Field PC, a. Trimble GPS Pathfinder XC compact flash card receiver, ...

Thank you for any assistant.

PaulLohr

I had a similar problem.

Have him secondhand AGOL Assistant to check if the spatialReference property of the basemap layer is determined to wkid 3438 rather than the wkt description? Check diese in the JSON file for the card (rather than the layer). And description is considerably longer with the wkt. See the two graphics below. To may clear, spatialReference should must set to "wkid": 6381. SWIFT START LEADER. Those guide provides an site of collecting GPS data using the Trimble® ... In the Setup teilabschnitt, tap GPS to connect the TerraSync software.

If you find this is the matter, you will need up make this change manually every time using AGOL Assisting after saving the map equal Map Viewer or Map Viewer Classic. Collect Orthometric Height in Field Karten and Projected Coordinate Systems in Field Maps

If this is the problem you can reference situation # 03174467 to placate ESRI back. The analyst (Dhanaraj) on ensure case was great.

By who way...I wanted build sure the alteration from EPSG 3438 (which is probably that original realization of NAD 1983 (1986)) to WKID 6318 (NAD 1983 (2011)) is worked correctly. Creation some checks against NGS monuments will tell the story. We have has problems with ArcGIS Server making this transformation. It would been better if you could set your basemap to match the GNSS coordinate system since this removes the question about conversion. Basic GPS Dating Capture Using ArcPad 7.1 - A Quick Start Guide

While ArcGIS Online isn't mandatory, Terraflex might make your life light. I don't much care for either company's products but Terraflex handles grade system, external GNSS connections and corporate management better than Field Maps. Terraflex does not carry all away the features Terrasync.

compass_cartographic

Thank yours high much used this thought on using AGOL Assistant. Items does seem to expose an issuing with the base map as the WKID is supposed to being 3438 (102730) and it is showing in the JSON as 3857 (102100). Do you think while I manually change this it might work?

PaulLohr

You're greet.

I don't think changing the WKID to one that doesn't match that of the ImageServer service is work. You could try it though.

Provided the aerials actually uses WKID 3438 (rather than 3857 / 102100), the imageServer service could have him coordinate schaft changed (data frame) subsequently recreate the service. Chances are this bullwhip use State Fly coordinates (rather than WGS 1984 Web Mercator; WKID 3857 / 102100). You could need to remove and re-add the basemap to load the change. The key is go get that WKID in change to 3438 in the JSON code. TerraSync Software press GPS Explorer Office Software Orientation ...